![](/images/new-backgrounds/1308428/308428663x1.webp)
Administration Commands
query_cs_trace
2.114.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
No parameter errors occur for this command.
State Check
If the command does not execute because of a state error, SNAplus2 returns the following parameters:
primary_rc
STATE_CHECK
secondary_rc
INVALID_SYM_DEST_NAME
The list_options parameter was set to LIST_INCLUSIVE to list all entries starting from the supplied name, but the sym_dest_name parameter value was not valid.
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary return codes that are common to all commands.
2.115 query_cs_trace
The query_cs_trace command returns information about the current tracing options for data sent between computers in the SNAplus2 domain. For more information about tracing options, refer to
This command may be issued to a running node or to a
On Windows clients,
2.115.1 Supplied Parameters
Parameter name | Type | Length | Default |
[query_cs_trace] |
|
|
|
dest_sys | character | 128 | (null string) |
Supplied parameter is:
dest_sys
The server name for which tracing options are to be queried.
To query tracing options on messages flowing between the computer to which this command is issued (either the local computer or one identified by the
If the server name includes a . (period) character, SNAplus2 assumes that it is a
332