HP UX Internet and Networking Software manual Startinternalpu, Puname

Administration Commands

start_internal_pu

primary_rc

STATE_CHECK

secondary_rc

DLC_DEACTIVATING

The specified DLC has already been started, and is being deactivated.

Other Conditions

Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary return codes that are common to all commands.

2.195 start_internal_pu

The start_internal_pu command requests DLUR to initiate SSCP-PU session activation for a previously defined local PU that is served by DLUR.

This command must be issued to a running node.

2.195.1 Supplied Parameters

Parameter name	Type	Length	Default
[start_internal_pu]
pu_name	character	8
dlus_name	character	17	(null	string)
bkup_dlus_name	character	17	(null	string)

Supplied parameters are:

pu_name

Name of the internal PU to be started. This PU must have been previously defined using de- fine_internal_pu. The name is a type-A character string starting with a letter.

dlus_name

Name of the DLUS node that DLUR will contact to solicit SSCP-PU session activation for the given PU. Specify 3–17 type-A characters, consisting of a 1–8 character network name, followed by a period, followed by a 1–8 character DLUS node name.

To use the DLUS specified in define_internal_pu, or the global default specified in de- fine_dlur_defaults if no DLUS was specified in define_internal_pu, do not specify this parameter.

bkup_dlus_name

Name of the DLUS node that DLUR will store as the backup DLUS for the given PU. Specify 3–17 type-A characters, consisting of a 1–8 character network name, followed by a period, followed by a 1–8 character backup DLUS name.

To use the backup DLUS specified in define_internal_pu, or the global backup default specified in define_dlur_defaults if no backup DLUS was specified in define_internal_pu, do not specify this parameter.

2.195.2 Returned Parameters

No parameters are returned by SNAplus2 when this command executes successfully.

600