Administration Commands

define_lu_0_to_3

Network accessible unit address of the LU. This address is a number in the range 1255.

pool_name

Name of the pool to which this LU belongs. This name is an 8-byte type-A character string. If a pool with the specified name is not already defined, SNAplus2 adds a new pool with this name and assigns the LU to it.

If the LU does not belong to a pool, do not specify this parameter.

pu_name

Name of the PU (defined using define_*_ls) that this LU will use. This name is a type-A character string starting with a letter.

priority

LU priority when sending to the host. Possible values are:

NETWORK

The LU has priority on the network.

HIGH

High priority is given to the LU.

MEDIUM

Medium priority is given to the LU.

LOW

Low priority is given to the LU.

lu_model

Type of the LU. Possible values are:

3270_DISPLAY_MODEL_2

LU type is a 3270 display model 2.

3270_DISPLAY_MODEL_3

LU type is a 3270 display model 3.

3270_DISPLAY_MODEL_4

LU type is a 3270 display model 4.

3270_DISPLAY_MODEL_5

LU type is a 3270 display model 5.

PRINTER

LU type is a printer.

SCS_PRINTER

LU type is an SCS printer.

RJE_WKSTN

LU type is an RJE workstation.

UNKNOWN

LU type is unknown. LU type will be determined when the session to the host is established.

123

Page 123
Image 123
HP UX Internet and Networking Software manual Poolname, Priority, Lumodel