HP UX Internet and Networking Software manual Tnserversupport, Backlevelclient, Sslsupport

Administration Commands

query_node_limits

Specifies whether your license allows you to use PU concentration on this node. Possible values are:

YES

Your license allows this node to provide PU concentration support.

NO

Your license does not allow this node to provide PU concentration support.

tn_server_support

Specifies whether your license allows you to use TN server on this node. Possible values are:

YES

Your license allows this node to provide TN server support.

NO

Your license does not allow this node to provide TN server support.

hpr_support

Indicates whether HPR is supported on this node. Possible values are:

YES

HPR is supported.

NO

HPR is not supported.

back_level_client

Specifies whether this server is running the software that supports back-level clients. Use this software when you are migrating a client-server SNAplus2 system to a new release of the SNAplus2 software, to indicate that different computers in the system are running different levels of the software. For more information about back-level client support, refer to the HP-UX SNAplus2 Migration Guide.

This parameter returns information about whether the software is currently running, not on license restric- tions.

Possible values are:

YES

The back-level client support software is running.

NO

The back-level client support software is not running.

ssl_support

This parameter is reserved.

2.157.3 Error Return Codes

If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.

Parameter Check

No parameter errors occur for this command.

State Check

No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands, occur for this command.

495