Administration Commands

query_nn_topology_tg

status

Specifies the status of the TG. Possible values are:

NONE

Transmission group link is not established.

TG_OPERATIVE

Transmission group link is operative.

TG_CP_CP_SESSIONS

Transmission group link is operative and carrying CP-CP sessions.

TG_QUIESCING

Transmission group link is shutting down.

TG_HPR

Transmission group supports High Performance Routing (HPR) protocols.

TG_RTP

Transmission group supports Rapid Transport Protocol (RTP).

effect_cap through user_def_parm_3

Default TG characteristics used for implicit link stations using this port and as the default TG characteristics for defined link stations that do not have explicitly defined TG characteristics. The TG characteristics parameters are ignored if the LS is to a downstream PU.

For more information about these parameters, see Section 2.60, define_tr_ls, define_ethernet_ls, define_fddi_ls.

subarea_number

If the owner of the destination of the TG is subarea capable, this parameter contains the subarea number of the type-4 or type-5 node that owns the link station associated with the TG on the subarea capable node. Otherwise, this parameter is set to all binary zeros.

tg_type

Type of the TG. Possible values are:

APPN_OR_BOUNDARY_TG

APPN TG or boundary function based TG.

INTERCHANGE_TG

Interchange TG.

VIRTUAL_ROUTE_BASED_TG

Virtual route based TG.

UNKNOWN

The TG type is unknown.

intersubnet_tg

Specifies whether the TG is an intersubnetwork TG. Possible values are:

YES

The TG is an intersubnetwork TG.

NO

The TG is not an intersubnetwork TG.

cp_cp_session_active

479

Page 479
Image 479
HP UX Internet and Networking Software manual Subareanumber, Tgtype, Intersubnettg