Compliances
C.3 Safety Compliance
Underwriters Laboratories Compliance Statement
Important! Before making connections, make sure you have the correct cord set. Check it (read the label on the cable) against the following:
Operating Voltage | Cord Set Specifications |
|
|
120 Volts | UL Listed/CSA Certified Cord Set |
|
|
| Minimum 18 AWG |
|
|
| Type SVT or SJT three conductor cord |
|
|
| Maximum length of 15 feet |
|
|
| Parallel blade, grounding type attachment plug rated |
| 15 A, 125 V |
|
|
240 Volts (Europe only) | Cord Set with |
| with minimum diameter of 0.75 mm2 |
| |
|
|
| Male plug rated 10 A, 250 V |
|
|
The unit automatically matches the connected input voltage. Therefore, no additional adjustments are necessary when connecting it to any input voltage within the range marked on the rear panel.
88
