SMC Networks SMC2304WBR-AG manual Configuring a Macintosh Computer

Setting Up TCP/IP

3.In the Local Area Connection Properties box, verify the box next to Internet Protocol (TCP/IP) is checked. Then highlight the Internet Protocol (TCP/IP), and click the Properties button.

4.Select “Obtain an IP address automatically” to configure your computer for DHCP. Click the OK button to save this change and close the Properties window.

5.Click the OK button again to save these new changes.

6.Reboot your PC.

Configuring a Macintosh Computer

You may find that the instructions here do not exactly match your screen. This is because these steps and screen shots were created using Mac OS 10.2. Mac OS 7.x and above are all very similar, but may not be identical to Mac OS 10.2.

1.Pull down the Apple Menu. Click System Preferences and select Network.

2.Make sure that Built-in Ethernet is selected in the Show field.

3.On the TCP/IP tab, select Using DHCP in the Configure field.

4.Close the

TCP/IP dialog box.

21