Installing the EZ-Stream Wireless Router103.3 | Attach the EZ-Stream Wireless Router to the Internet
If Internet services are provided through an xDSL or cable modem, use
unshielded or shielded twisted-pair Ethernet cable (Category 3 or
greater) with RJ-45 plugs to connect the broadband modem directly
to the WAN port on the Router.
Figure 3-4. Making the WAN Connection
Note: When connecting to the WAN port, use 100-ohm
Category 3, 4, or 5 shielded or unshielded twisted-pair
cable with RJ-45 connectors at both ends for all
connections.
3.4 | Connecting the Power Adapter
Plug the power adapter into the power socket on the Router, and the
other end into a power outlet. Check the indicator marked “PWR” on
the front panel to be sure it is on. If the power i
ndicator does not
light, refer to
“Troubleshooting” on page 76
.
12
ISP
(Primary)
DSL/Cable
Modem