Configuring the EZ-Stream Wireless Router
1.Click WIRELESS/Channel and SSID of the navigation menu for configuring the operation “Mode” (11a as example) and radio “Channel” on the first access point.
2.Go to WIRELESS/WDS page of the first access point, enter the (11a) WLAN MAC address of the peer (2nd, 3rd, 4th or the 5th) access point, and select the operation “Mode” (11a).
3.Then open the WIRELESS/Channel and SSID page of the peer access point, configure the same operation mode (11a) and the same radio channel.
4.Go to the WIRELESS/WDS page of the peer access point, enter the (11a) WLAN MAC address of the first access point, and select the same operation mode (11a).
Note: See the STATUS/INFORMATION on page 33 for the WLAN MAC addresses.
NAT
From this section you can configure the Virtual Server, and Special Application features that provide control over the TCP/UDP port openings in the router’s firewall. This section can be used to support several Internet based applications such as web,
NAT allows one or more public IP addresses to be shared by multiple internal users. Enter the Public IP address you wish to share into the Global IP field. Enter a range of internal IPs that will share the global IP.
56
