Administration Commands
define_tr_port, define_ethernet_port, define_fddi_port
2.61.1 Supplied Parameters
Parameter name | Type | Length | Default |
[define_tr_port], [define_ethernet_port], [define_fddi_port] | |||
port_name | character | 8 |
|
description | character | 31 | (null string) |
dlc_name | character | 8 |
|
port_number | decimal |
| 1 |
max_rcv_btu_size | decimal |
| 4105 (TR) |
|
|
| 1033 (Ethernet) |
|
|
| 4105 (FDDI) |
tot_link_act_lim | decimal |
| 64 |
inb_link_act_lim | decimal |
| 0 |
out_link_act_lim | decimal |
| 0 |
ls_role | constant |
| LS_NEG |
implicit_dspu_services | constant |
| NONE |
implicit_dspu_template | character | 8 | (null string) |
implicit_ls_limit | decimal |
|
|
act_xid_exchange_limit | decimal |
| 9 |
nonact_xid_exchange_limit | decimal |
| 5 |
ls_xmit_rcv_cap | constant |
| LS_TWS |
max_ifrm_rcvd | decimal |
| 7 |
target_pacing_count | decimal |
| 7 |
max_send_btu_size | decimal |
| 4105 (TR) |
|
|
| 1033 (Ethernet) |
|
|
| 4105 (FDDI) |
lsap_address | hex number |
| 0x04 |
implicit_cp_cp_sess_support | constant |
| YES |
implicit_limited_resource | constant |
| NO |
implicit_hpr_support | constant |
| NO |
implicit_link_lvl_error | constant |
|
|
implicit_deact_timer | decimal |
| 30 |
implicit_uplink_to_en | constant |
| NO |
effect_cap | decimal |
| 3993600 (TR) |
|
|
| 3993600 (Ethernet) |
|
|
| 98304000 (FDDI) |
connect_cost | decimal |
| 0 |
byte_cost | decimal |
| 0 |
security | constant |
| SEC_NONSECURE |
prop_delay | constant |
| PROP_DELAY_LAN |
user_def_parm_1 | decimal |
| 0 |
user_def_parm_2 | decimal |
| 0 |
user_def_parm_3 | decimal |
| 0 |
initially_active | constant |
| YES |
test_timeout | decimal |
| 5 |
test_retry_limit | decimal |
| 2 |
xid_timeout | decimal |
| 5 |
xid_retry_limit | decimal |
| 2 |
t1_timeout | decimal |
| 5 |
t1_retry_limit | decimal |
| 5 |
Supplied parameters are:
port_name
Name of the port to be defined. This name is a character string using any locally displayable characters.
description
A text string describing the port. SNAplus2 uses this string for information only. It is stored in the node’s configuration file and returned on the query_port command.
dlc_name
