HP UX Internet and Networking Software manual Lulocation, Pluname, Rscvlen

Administration Commands

query_dlur_lu

lu_name

Name of the LU.

2.124.3 Returned Parameters: Detailed Information

Parameter name	Type	Length
lu_name	character	8
pu_name	character	8
dlus_name	character	17
lu_location	constant
nau_address	decimal
plu_name	character	17
rscv_len	hex array	256

If the command executes successfully and you specified DETAIL as the list_options parameter value, SNAplus2 returns the following parameters:

lu_name

Name of the LU.

pu_name

Name of the PU associated with the LU.

dlus_name

If the SSCP-LU session is active, this parameter contains the name of the DLUS node used by the LU; it is not used otherwise.

lu_location

Location of LU.

Possible values are:

INTERNAL

LU is on the local node.

DOWNSTREAM

LU is on a downstream node (network node only).

nau_address

Network accessible unit (NAU) address of the LU, in the range 1–255.

plu_name

If the PLU-SLU session is active, this parameter contains the name of the PLU; otherwise, it is set to 17 zeros.

rscv_len

Route Selection control vector (RSCV) as defined in Systems Network Architecture: Formats. This control vector defines the session route through the network and is carried on the BIND. This RSCV is included only if the node’s configuration indicates that DLUR RSCVs should be stored and the PLU-SLU session is active.

2.124.4 Error Return Codes

If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.

359