Administration Commands
query_node
dyn_ls_bad_xids
Total number of unsuccessful XID exchanges that have occurred on all dynamic link stations since the node was last started.
dlur_release_level
Release level of the DLUR architecture supported by the node. This parameter is set to 1 (the only release level of DLUR currently defined); future versions may incorporate later release levels of the DLUR architecture and therefore may return different values.
fq_nn_server_name
End node only. Name of the network node server for the node.
current_isr_sessions
Number of ISR sessions routed through this node.
nns_dlus_served_lu_reg_supp
This parameter applies only if the local node is an end node or a Branch Network Node; it is reserved otherwise.
Specifies whether the network node server supports
YES
The network node server supports registration of
NO
The network node server does not support registration of
UNKNOWN
The node does not have a network node server.
nns_en_reg_diff_owning_cp
This parameter applies only if the local node is a Branch Network Node; it is reserved otherwise.
Specifies whether the network node server supports option set 1123 - End Node Resource Registration With Different Owning CP Name NNS(BrNN) Support.
YES
The network node server supports option set 1123.
NO
The network node server does not support option set 1123.
UNKNOWN
The node does not have a network node server.
nn_functions_2
This parameter applies only if the local node is a Network Node; it is reserved otherwise.
If the node supports branch awareness, APPN Option Set 1120, this parameter is set to the following value:
BRANCH_AWARENESS
The node supports option set 1120.
branch_ntwk_arch_version
This parameter applies only if the local node is a Network Node or a Branch Network Node; it is reserved otherwise.
Specifies the version of the Branch Network Architecture supported. This is set to 1, or 0 (zero) if the node does not support the Branch Network Architecture.
489
