Operation
4. Operation
Control Panel Description
Button | Function |
|
|
|
|
| |
<MENU> | Exits from the current menu or function |
| |
|
|
|
|
<ENTER> | Enables the currently displayed | menu or | sets the currently |
selected value in to the current function |
| ||
|
| ||
|
|
|
|
<JOG WHEEL> | Navigates upwards through the | menu list | and increases the |
numeric value when in a function |
|
| |
|
|
| |
|
|
|
|
Home Screen
ENTER button
MENU button
Upon power up, the LCD will show the Legend logo and the fixture’s identification. After completing the power up tests, the LCD will show the DMX address, the DMX mode, and the fixture’s temperature, along with the warning sign if the tests have detected an error.
| • When the warning sign shows, press <ENTER> to read the corresponding |
| error message (see Error Messages in the Technical Information chapter). |
| • Press <ENTER> while looking at an error messages to clear it. |
Control Options | allows for the control of up to 22 fixtures in the |
| You can set the Legend™ 1200E Spot’s start address in the 001~512 DMX range. This |
| fixtures in the |
Legend™ 1200E Spot User Manual Rev. 03c |