IBM 201 manual Error Code

Table 18. Diagnostic error messages (continued)

Error Code	Meaning	FRU/action
166-342-000	System Management failed:	1.	Ensure that the latest firmware levels for the Remote
	Remote Supervisor Adapter
			Supervisor Adapter and BIOS
	BIST indicate failed tests).
		2.	Disconnect all server and option power cords from the
			unit, wait 30 seconds, reconnect, then retry.
		3.	Remote Supervisor Adapter
166-400-000	System Management failed:	1.	Re-flash or update firmware for ISMP
	System management
		2.	System board
	hardware on system board
	failed) (ISMP Self Test Result
	failed tests: x where x =
	Flash, RAM, or ROM).
180-XXX-000	Diagnostics LED failure	Run the diagnostics LED test for the failing LED.
180-XXX-001	Failed front LED panel test
180-XXX-002	Failed diagnostics LED panel	1.	System board
	test	2.	Power-switch assembly
180-XXX-005	Failed SCSI backplane LED	1.	SCSI backplane
	test
		2.	SCSI backplane cable
		3.	System board
180-XXX-006	Memory Board LED test	Suspected part:
		1.	Memory
		2.	Processor/PCI board
		3.	System board
180-361-003	Failed fan LED test	1.	Fans
		2.	System board
201-XXX-0NN	Failed Memory test	1.	DIMM Location DIMM1 - DIMM4 where NN can be a
			value from 01 to 04. 01 = DIMM2, 02 = DIMM1, 03 =
			DIMM4, 04 = DIMM3
		2.	System board
201-XXX-999	Multiple DIMM failure; see	1.	See error text for failing DIMMs
	error text for failing DIMMs
		2.	System board
202-XXX-001	Failed system cache test	1.	VRM 1
		2.	Microprocessor 1
202-XXX-002	Failed system cache test	1.	VRM 2
		2.	Microprocessor 2
206-XXX-000	Failed diskette drive test	1.	Cable
		2.	Diskette drive
		3.	System board
215-XXX-000	Failed IDE CD-ROM test	1.	CD-ROM drive cables
		2.	CD-ROM drive
		3.	System board
217-198-XXX	Could not establish drive	1.	Check cable and termination
	parameter
		2.	SCSI backplane
		3.	Fixed disk

Appendix C. Engine POST messages 103