IBM 201 manual NAS 200 User’s Reference

Table 18. Diagnostic error messages (continued)

Error Code	Meaning	FRU/action
166-198-000	System Management	1. Re-run the Diagnostic Test
	aborted: (Unable to
		2. Fix other error conditions and retry. These include other
	communicate with the
			Failed System Management tests and items logged in the
	Remote Supervisor Adapter.
			optional Remote Supervisor Adapter’s System Error Log
	It may be busy. Run the test
		3.	Disconnect all server and option power cords from the
	again). (Communication with
	the Remote Supervisor		unit, wait 30 seconds, reconnect, and retry.
	Adapter has failed).	4.	Remote Supervisor Adapter, if installed
		5.	System board
166-201-001	System Management failed:	1. If installed, reseat I2C cable between Remote
	(I2C Bus Error(s))
			Supervisor Adapter (in PCI slot 1/J44) and system
	(ISMP indicates I2C errors on		board
		2.	Reseat memory DIMMs
	bus 0. Potential FRUs:
	Memory DIMMs, system	3.	Memory DIMMS
	board)	4.	System board
166-201-002	System Management failed:	1. Reseat I2C cable between operator information panel
	(I2C Bus Error(s))
			and system board (J39)
	(ISMP indicates I2C errors on	2.	Operator information panel
	bus 2. Potential FRUs: LED	3.	System board
	front panel, system board).
166-201-003	System Management failed:	1. Reseat cables between power backplane and system
	(I2C Bus Error(s))
			board
	(ISMP indicates I2C errors on	2.	Operator information panel
	bus 3. Potential FRUs: power	3.	System board
	backplane, system board).
166-201-004	System Management failed:	1. If installed, reseat I2C cable between Yugo and DASD
	(I2C Bus Error(s))
			backplane and DASD I2C on system board (J0)
	(ISMP indicates I2C errors on	2.	System board
	bus 4. Potential FRUs: DASD
	backplane, system board).
166-201-005	System Management failed:	1.	Reseat Memory DIMMs
	(I2C Bus Error(s))
		2.	Reseat processors
	(ISMP indicates I2C errors on	3.	Memory DIMMs
	bus 0, 1, or 5. Potential	4.	Processors
	FRUs: Memory DIMMs,
		5.	System board
	CPUs, system board).
166-260-000	System Management failed:	1. Disconnect all server and option power cords from
	(Unable to restart Remote
			server, wait 30 seconds, reconnect, and retry.
	Supervisor Adapter). Restart
		2. Reseat the Remote Supervisor Adapter in PCI slot 1/J44).
	Remote Supervisor Adapter
		3.	Remote Supervisor Adapter
	Error. After restarting,
	Remote Supervisor Adapter
	communication was lost.
	Unplug and cold boot to reset
	the Remote Supervisor
	Adapter).

102NAS 200 User’s Reference