IBM 201 manual POST error messages

POST error messages

Table 17 provides information about the POST error messages that can appear during startup.

Note that these diagnostic error messages require the attachment of a monitor, keyboard, and mouse (before you power on the system) to enable you to see them.

In the following error messages, X can be any number or letter.

Table 17. POST error messages

Error	Meaning	FRU/action
code/Symptom
062	Three consecutive boot	1.	Run Configuration/Setup
	failures using the default
		2.	Battery
	configuration
		3.	System board
		4.	Processor
101, 102	System and processor error	System board
106	System and processor error	System board
111	Channel check error	1.	Failing ISA Adapter
		2.	DIMM
		3.	System board
114	Adapter read-only memory	1.	Failing Adapter
	error
		2.	Run Diagnostics
129	Internal cache error	1.	Processor
		2.	Optional processor (if installed)
151	Real-time clock error	1.	Run Diagnostics
		2.	Battery
		3.	System board
161	Real-time clock battery error	1.	Run Configuration/Setup
		2.	Battery
		3.	System board
162	Device Configuration error	1.	Run Configuration/Setup
			Note: Be sure to load the default settings and any
			additional desired settings; then, save the configuration.
		2.	Battery
		3.	Failing Device
		4.	System board
163	Real-time clock error	1.	Run Configuration/Setup
		2.	Battery
		3.	System board
164	Memory configuration	1.	Run Configuration/Setup
	changed
		2.	DIMM
175	Hardware error	System board

92NAS 200 User’s Reference