Setup
Mounting
Orientation
Rigging
Product Mounting Diagram
Safety Cable Installation Diagram
Before mounting this fixture, read and follow the safety recommendations indicated in the Safety Notes section (page 2 of this manual).
Always mount this fixture in any safe position while making sure that there is adequate room around it for ventilation, configuration, and maintenance.
Make sure to mount this fixture away from any flammable material as indicated in the Safety Notes section.
The Legend™ 1200E Spot comes with two omega brackets and two clamps. You will have to use two mounting points per fixture. You can also mount the Legend 1200E Spot on the floor or any other firm, horizontal surface. CHAUVET® recommends following the general guidelines below when mounting the Legend™ 1200E Spot.
•When selecting an installation location, consider ease of access to the fixture for operation, programming adjustments, and routine maintenance.
•Never mount the fixture in places where rain, high humidity, extreme temperature changes, or restricted ventilation may affect it.
•If hanging this fixture, make sure that the location where you are mounting the fixture can support its weight. Please see the Technical Specifications section of this manual for the weight requirement of this fixture.
Only mount this fixture where the base is in a horizontal position, either hanging or standing, as indicated in the diagram below. Doing otherwise may cause damage to the fixture and void its warranty.
Standing position
Hanging
position
Standing position
Safety
cable
Omega brackets with clamps
Legend™ 1200E Spot User Manual Rev. 03c |
