JBL CFSERIES owner manual Fuse Replacement

Models: CFSERIES

1 4
Download 4 pages 41.86 Kb
Page 4
Image 4

FUSE REPLACEMENT

The CF120 & CF150 have fuses which will protect the speaker from being overpow- ered under normal conditions. Unscrew the cap labeled "fuse" and replace with a 250V, 5 x 20mm, slow-blow TDS-type fuse:

2.5Amp for CF120; 3.0 Amp for CF150.

Replacement with any other type fuse will void your JBL warranty.

GENERAL CARE

The grille is held in place by pins near the edges. To remove the grille, grasp it by both top and bottom edges and pull gently. To replace, reposition it carefully and press gently at the corners. Do not push on the center area of the grille. The loudspeaker cabinet may be cleaned with a slightly damp cloth. To remove dust from the grille cloth, use a vacuum with a brush attachment. Spots may be removed with a commercial spot remover. Do not use any cleaners or solvents on the speaker drivers themselves.

CF SERIES LOUDSPEAKERS

SERVICE

Should your loudspeaker ever need service, return it to the JBL dealer from whom it was purchased. If for some reason this is impractical, in the United States, call

800-336-4JBL for your nearest warranty station.

Military personnel who purchased from authorized military outlets should return them to a similar outlet or contact:

Mohawk Marketing Corp.

149 Business Park Drive

P.O. Box 62229

Virginia Beach, VA 23462

Phone: 804-499-8901

FAX: 804-497-6690

If purchased outside the United States, contact your local distributor to make arrangements for repair service. Do not return products to the JBL factory.

Specifications

CF80

CF100

CF120

CF150

Application

2-Way Bookshelf

3-Way Floorstanding

3-Way Floorstanding

3-Way Floorstanding

High Frequency Dome Transducer

14 mm Ti Laminate

14 mm Ti Laminate

14 mm Ti Laminate

25 mm Mylar Laminate

Mid Frequency (Polymer Laminate)

n/a

4-1/2"

4-1/2"

6-1/2"

Low Frequency (Polymer Laminate)

8"

10"

12"

15"

Crossover Frequencies

4.5kHz

1400Hz/7kHz

800Hz/7kHz

850Hz/4.5kHz

Frequency Response (– 6dB)

43Hz to 20kHz

39Hz to 20kHz

36Hz to 20kHz

32Hz to 20kHz

Sensitivity (1 watt/1 meter)

92dB

94dB

96dB

98dB

Nominal Impedance

8 Ohms

8 Ohms

8 Ohms

8 Ohms

Recommended Amplifier Power*

10 to 100 watts

10 to 175 watts

10 to 250 watts

10 to 325 watts

External Dimensions (H x W x D)

19-5/8 x 11 x 11-3/8"

27 x 12-13/16 x 11-11/16"

31-1/2 x 16-1/2 x 15"

35 x 17-7/8 x 18-15/16"

 

498 x 279 x 289mm

686 x 325 x 297mm

800 x 420 x 381mm

889 x 454 x 481mm

Weight (each)

23 lbs (10.4 kg)

32 lbs (14.5 kg)

50 lbs (22.7 kg)

62 lbs (28.1 kg)

*The maximum recommended amplifier power rating will ensure proper system headroom to allow for occasional program peaks. We do not recommend sustained operation at these maximum power levels.

JBL continually strives to improve its products. New materials, production methods and design refinements are introduced into existing models without notice as a routine expression of our design philosophy. For this reason, JBL loudspeakers may differ in some respect from their published specifications and descriptions, but will always equal or exceed the original specifications unless otherwise stated.

JBL Consumer Products, Inc.

80 Crossways Park West

Woodbury, NY 11797

8500 Balboa Boulevard Northridge, CA 91329

800 336 4JBL (4525)

Declaration of Conformity

We, JBL Europe A/S

Kongevejen 194B

DK-3460 Birkerød

DENMARK

declare in own responsibility, that the products described in this owner’s manual are in compliance with technical standards:

EN 50 081-1/1992

EN 50 082-1/3.1995

A Harman International Company

Part No. 15-30-4142-00

Steen Michaelsen

JBL Europe A/S

Birkerød. DENMARK. 2/96

Page 4
Image 4
JBL CFSERIES owner manual Fuse Replacement