WA R R A N T Y I N F O R M AT I O N

1 Year Limited Warranty

Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions (collectively “JCS”) warrants that for a period of one year from the date of purchase, this product will be free from defects in material and workmanship. JCS, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period.

Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty. Do NOT attempt to repair or adjust any electrical or mechanical functions on this product. Doing so will void this warranty.

This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. JCS dealers, service centers, or retail stores selling JCS products do not have the right to alter, modify or any way change the terms and conditions of this warranty.

This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than JCS or an authorized JCS service center. Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes.

What are the limits on JCS’s Liability?

JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or condition.

Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty.

JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise.

JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party.

Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights that vary from province to province, state to state or jurisdiction to jurisdiction.

How to Obtain Warranty Service

In the U.S.A.

If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-253-2764 and a convenient service center address will be provided to you.

In Canada

If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-253-2764 and a convenient service center address will be provided to you.

WA R R A N T Y I N F O R M AT I O N

In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business Jarden Consumer Solutions located in Boca Raton, Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions, located at 20 B Hereford Street, Brampton, Ontario L6Y 0M1. If you have any other problem or claim in connection with this product, please write our Consumer Service Department. PLEASE

DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE.

© 2011 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All Rights Reserved.

Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.

Printed In China

SPR-060111-495

P.N. 148576

pure indoor living

LOW PROFILE

HEATER

MODEL: BLP3340

Instruction Leaflet

Read instructions before operating. Retain for future reference.

Questions? Comments? Call 1-800-253-2764 in North America.

PLEASE READ AND SAVE THESE

IMPORTANT SAFETY INSTRUCTIONS

O P E R AT I N G - I N S T R U C T I O N S

C L E A N I N G A N D M A I N T E N A N C E

IMPORTANT INSTRUCTIONS: When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1.

Read all instructions before using this heater.

2.

This heater is hot when in use. To avoid burns, do not

 

let bare skin touch hot surfaces. If provided, use

 

handles when moving this heater. Keep combustible

 

materials, such as furniture, pillows, bedding, papers,

 

clothes, and curtains at least 3 feet (0.9 m) from the

 

front of the heater and keep them away from the sides

 

and rear.

3.

Extreme caution is necessary when any heater is used

 

by or near children or invalids and whenever the heater

 

is left operating and unattended.

4.

Always unplug heater when not in use.

5.

Do not operate any heater with a damaged cord or plug

 

or after the heater malfunctions, has been dropped or

 

damaged in any manner. Discard heater, or return to

 

authorized service facility for examination and/or

 

repair.

6.

Do not use outdoors.

7.

This heater is not intended for use in bathrooms,

 

laundry areas and similar indoor locations. Never locate

 

heater where it may fall into a bathtub or other water

 

container.

8.

Do not run cord under carpeting. Do not cover cord with

 

throw rugs, runners, or similar coverings. Do not route

 

cord under furniture or appliances. Arrange cord away

 

from traffic area and where it will not be tripped over.

9.

To disconnect heater, turn controls to off, then remove

11.To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.

12.A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.

13.Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.

14.Always plug heaters directly into a wall outlet/ receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).

15.When unplugging, be sure to pull by the plug and not the cord.

16.If the heater will not operate, see specific instructions on Auto Safety Shut-off.

17.DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. The inside of the unit contains no user serviceable parts. All servicing should be performed by qualified personnel only.

18.Discontinue use if plug or outlet is hot. It is recommended that the outlet be replaced if plug or outlet is hot to touch.

19.The heater must not be located immediately below a socket-outlet. Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.

PLEASE READ AND SAVE

THESE IMPORTANT

ECO-SMART™ TECHNOLOGY

ECO-SMART™ is a technology that allows this portable heater to heat an area more efficiently through a continuous cycling of wattages. Although no physical change is noticeable, when the heater runs in ECO-SMART™ mode it consumes less energy over a long period of time. To activate the Eco-Smart™ cycle depress the Eco-Smart™ button. The Eco-Smart™ cycle can be deactivated by depressing the Eco-Smart™ button. Once deactivated, the heater will run continuously at 1500 watts.

PRE-OPERATING INSTRUCTIONS

1.Make sure the heater is OFF before plugging the heater into the outlet.

2.Place the heater on a firm, level surface.

3.Avoid overloading your circuit by not using other high wattage appliances in the same outlet. At 1500 Watts, this unit draws 12.5 Amps.

4.Make sure unit and plug is free of moisture and debris before plugging into an electrical outlet.

CONTROL PANEL DETAILS (Figure 1)

Control Panel:

1.

Press the On/Off button to turn unit on.

2.

Select temperature by pressing the Temperature button

 

until the desired temperature is chosen.

3.

Set the Timer for the duration in which you would like the

 

heater to run before turning off automatically.

4.

Then choose whether or not you would like to use the Eco-

 

Smart™ Technology by pressing the Eco-Smart™ button.

FCC STATEMENT

Potential for Radio/Television interference

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. The product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If the product does cause harmful interference to radio or television reception, which can be determined by turning the product on or off, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the product and the

receiver.

• Connect the product into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

• Changes or modifications not expressly approved by the

CLEANING/MAINTENANCE

Always unplug the heater before cleaning and allow the heater to cool down.

1.Clean the unit with a soft cloth moistened with a mild soap solution.

2.NEVER use abrasive or flammable solvents to clean the unit.

3.After cleaning, be sure to completely dry the unit with a cloth or towel.

4.Store heater in a cool, dry location.

5.It is recommended that you store the unit in its original carton.

TIP: Over time, dust may accumulate on the front grills. This can be removed by wiping the unit with a damp cloth.

TROUBLESHOOTING

If your heater fails to operate:

UNPLUG THE UNIT and make sure the heater is placed in an upright position (see Tip Over Shut-Off section).

Make sure the electrical outlet or circuit breaker is working.

Check for obstructions. If you find an obstruction turn the heater OFF, and unplug the unit. Carefully remove the obstruction and follow the reset instructions.

The temperature may be set too low. Adjust the thermostat until the heater restarts.

Please DO NOT attempt to open or repair the heater.

auto safety shut-off WITH INSTANT TIP OVER PROTECTION

This heater is equipped with a patented, technologically- advanced safety system that requires the user to reset the heater if there is a potential overheat situation. When a potential overheat temperature is reached, the system will automatically shut the heater off. It can only resume operation when the user resets the unit. For specific reset instructions please refer to the unit.

To Reset the Heater:

1.Unplug the heater and allow 30 minutes for the heater to cool down.

2.After 30 minutes plug the heater in and operate normally.

3.If the heater does not work normally, repeat steps 1 and 2 again.

Tip Over Shut-Off:

When the unit is accidentally knocked over, it will instantly shut off. The unit may also shut off if it is moved or bumped. To reset, simply place the heater in an upright position and it will operate normally.

NOTE: If unit does not turn on when placed in the upright position, press the mode button once and heater will resume operation.

plug from outlet.

10. Do not insert or allow foreign objects to enter any

ventilation or exhaust opening as this may cause an

electric shock or fire, or damage the heater.

safety instructions

ON/OFF

TIMER

ECO-SMART™

 

 

TEMPERATURE

SENSOR

 

(NOT A BUTTON)

party responsible for compliance could void the user’s

authority to operate the equipment.

If you have any questions regarding your product or would like to learn more about other Bionaire® products, please contact our Consumer Service Department at 1-800-253-2764 or visit our website at www.bionaire.com.

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.

Do not attempt to modify this plug or defeat this

safety feature in any way.

Figure 1

Page 1
Image 1
Bionaire BLP3340 warranty ECO-SMART Technology, FCC Statement, Cleaning/Maintenance, Troubleshooting

BLP3340 specifications

The Bionaire BLP3340 is a versatile and efficient air purifier designed to enhance indoor air quality by effectively removing pollutants and allergens from the environment. This purifier is equipped with advanced technologies and features that make it a reliable choice for those seeking a healthier living space.

One of the standout features of the Bionaire BLP3340 is its multi-stage filtration system. This system includes a pre-filter, a True HEPA filter, and an activated carbon filter, which work together to capture a wide range of airborne contaminants. The pre-filter traps larger particles like dust and pet hair, while the True HEPA filter captures up to 99.97% of fine particles as small as 0.3 microns, including pollen, mold spores, and smoke. The activated carbon filter effectively reduces unpleasant odors, making the air fresher and more pleasant to breathe.

The BLP3340 also incorporates a modern design that fits seamlessly into various home environments. Its compact size makes it suitable for bedrooms, living rooms, or office spaces without taking up too much floor space. Additionally, the sleek aesthetics of the unit enhance the decor of any room.

Another notable characteristic of the Bionaire BLP3340 is its user-friendly interface. It features intuitive controls that allow users to easily adjust the fan speed and set a timer for automatic operation. With multiple speed settings, users can customize airflow to their preference and the specific air quality needs at different times of the day.

The purifier is also designed with whisper-quiet operation in mind, ensuring that it won’t disrupt daily activities or sleep. This feature is essential for those who desire a peaceful environment without sacrificing air quality.

For added convenience, the BLP3340 comes with filter replacement indicators that alert users when it's time to change the filters. This ensures that the unit remains effective in purifying the air and helps maintain optimal performance over time.

In summary, the Bionaire BLP3340 is a highly efficient air purifier boasting a multi-stage filtration system, attractive design, user-friendly features, and quiet operation. Its ability to reduce common allergens and improve indoor air quality makes it a smart investment for anyone looking to create a healthier living space. With its blend of technology and practicality, the BLP3340 stands out as a reliable choice in the market of air purifiers.