INSTALLATION/OPERATION MANUAL | GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W |
OPERATING PROCEDURES (continued)
Indicator Lights
There are four (4) indicator lights on the main control. The LED lights indicate the temperature status of each zone. There are two (4) zones per section of the grill, TOP, (platen), BACK GRILL, MIDDLE GRILL, and FRONT GRILL.
RED – The zone(s) is “TOO HOT” (more than 79˚F/43˚C over set temperature) OR a heat zone failure has occurred.
AMBER – The zone(s) is calling for heat.
GREEN – The zone(s) is at or above set temperature, but below 79˚F/43˚C over set temperature.
Standby Mode
To enter the standby mode:
1. Press the button. The upper platen will lower, and the grill will maintain a set temperature of Upper platen - 425˚ F (218˚C), Grill Surface - 350˚ F (177˚C).
To Exit the Standby Mode:
1.Press the GREEN PUSHBUTTON. The upper platen will raise.
To display the current temperatures:
1.Press the button and repeat for each zone to be displayed:
1st key press – Front Set Point 2nd key press – Front Actual 3rd key press – Mid Set Point 4th key press – Mid Actual 5th key press – Back Set Point 6th key press – Back Actual 7th key press – Platen Set Point 8th key press – Platen Actual
2.Pressing and holding the button for five (5) seconds will display all of the current temperatures at once.
T ### | F ### |
M ### | B ### |
|
|
Page 16
Cooking Procedures in MANUAL MODE
Breakfast
1.Select AM mode using the button.
2.Select Manual mode using the button.
3.Select a product from the AM product library using the or arrow buttons.
4.Following McDonalds procedures for the item selected, load product on the grill.
5.Press the GREEN pushbutton to initiate a cook cycle.
6.Alarm will sound when the cook cycle is complete.
7.Remove product and clean grill to prepare for the next cook cycle.
Lunch
Note: Switching from Breakfast to Lunch menu items will take approximately 10 minutes to heat to the appropriate temperatures.
1.Select PM mode using the button.
2.Select Manual mode using the button.
3.Select a product from the PM product library using the or arrow buttons.
4.Following the below lay pattern, load product on the grill.
5.Press the GREEN pushbutton to initiate a cook cycle.
6.Alarm will sound when the cook cycle is complete
7.Remove product and clean grill to prepare for next cook cycle.
To Change The Cook Time for a Menu Item
1.Select AM or PM mode using the button.
2.Select Manual mode using the button.
3.Select a product using the or arrow buttons.
4.PRESS the button to display the cook time.
5.Use the and buttons to change the cook time.
6.The control will automatically default back to the normal operating mode after 3 seconds.
PART #4521777 (03/19/08)