INSTALLATION/OPERATION MANUAL | GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W |
CONTROL PROGRAMMING (continued)
To Add NEW Menu Items
The following programming instructions serves as a GUIDE for programming the basic settings for CLAM menu items.
1. | PRESS and HOLD the | button for approximately 3 | |
| seconds. Controller will display previously selected | ||
| menu item and its corresponding item number. | ||
2. | PRESS the | or button until “Opt menu # - CLAM” is | |
| displayed on the controller. | ||
3. | PRESS the | button. The controller will display | |
| “PRODUCT” |
|
|
4. | PRESS and HOLD the | button. The currently select | |
| menu item name will begin to flash. |
5. | To spell out the product name: | |||
| a. | Use the | or | arrow buttons to scroll through |
|
| the character library. | ||
| b. | PRESS | or | to scroll right or left. |
| c. | PRESS the | button to save the new menu item | |
|
| name. |
|
|
6. | PRESS the | button. “Display Active” will be displayed. | ||
7. | PRESS the | button. “NO” will begin to flash. | ||
8. | PRESS the | button. “NO” will change to “YES”. | ||
9. | PRESS the | button to save the new setting. |
10. PRESS the | button. “GRILL SETPT” will be displayed. | |
11. PRESS the | button. The temperature will begin to | |
flash. |
|
|
12. Using the | or | button, change the temperature set |
point to the new desired temperature. | ||
13. PRESS the | button to save the new temperature set | |
point. |
|
|
14. PRESS the | button. “PLATSETPT” will be displayed. | |
15. PRESS the | button. The temperature will begin to | |
flash. |
|
|
16. Using the | or | button, change the temperature set |
point to the new desired temperature. | ||
17. PRESS the | button to save the new temperature set | |
point. |
|
|
18. PRESS the | button until “GAP MULTI/PR START” | |
appears in the display. | ||
19. PRESS the | button. The gap setting will begin to | |
flash. |
|
|
20. Using the | and DOWN button, change the gap | |
setting to the desired setting. | ||
21. PRESS the | button to save the new gap setting. | |
22. PRESS the | button 2X to exit and return to the normal |
operating mode.
Page 22 | PART #4521777 (03/19/08) |