Garland MWE3W Control Programming, Programming Modes System Setup, options, see page

GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W INSTALLATION/OPERATION MANUAL

CONTROL PROGRAMMING

Programming Modes; System Setup

To Change the Temperature Display Units (Fahrenheit / Celcius)

The temperature display units (F or C) will change the way a temperature is displayed on the controller (F – Fahrenheit, C – Celcius)

1.With the controller display ON and either displaying the current menu item or displaying “OFF”, PRESS and

	HOLD the	button for approximately 3 seconds.
	Controller will display previously selected menu item
	and its corresponding item number OR “Standby /
	Menu Item”.
2.	PRESS the	AND	arrow buttons TOGETHER.
	“CONFIGURE” will appear in the display.
3.	PRESS the	arrow button. “Setup” will appear in the
	display
4.	PRESS the	button. “Temperature Unit” will appear in
	the display.
5.	PRESS the	button. The currently set temperature
	unit will flash.
6.	PRESS the	OR	arrow buttons to change the
	flashing temperature unit.
7.	PRESS the	button to save the new setting.
8.	PRESS THE	2X to exit the program mode.

To Change the Time Display Units

Changing the Time Display Units will change the way timing cycles are displayed on the controller.

1.With the controller display ON and either displaying the current menu item or displaying “OFF”, PRESS and

	HOLD the	button for approximately 3 seconds.
	Controller will display previously selected menu item
	and its corresponding item number OR “Standby /
	Menu Item”.
2.	PRESS the	AND arrow buttons TOGETHER.
	“CONFIGURE” will appear in the display.
3.	PRESS the	arrow button. “Setup” will appear in the
	display.
4.	PRESS the	button. “Temperature Unit” will appear in
	the display.
5.	PRESS the	1X. “Time Unit” will appear in the display.

PART #4521777 (03/19/08)

6.	PRESS the	button. The current time unit will flash.
7.	PRESS the	OR arrow buttons to change the
	flashing time unit.
	For a complete listing of setup functions and their
	options, see page 25.
8.	PRESS the	button to save the new setting
9.	PRESS THE	2X to exit the program mode.

To change the Key Chirp (Yes / No)

Changing the Key Chirp On or Off will either turn on or off the sound of the controller when a button is pressed.

1.With the controller display ON and either displaying the current menu item or displaying “OFF”, PRESS and

	HOLD the	button for approximately 3 seconds.
	Controller will display previously selected menu item
	and its corresponding item number OR “Standby /
	Menu Item”.
2.	PRESS the	AND	arrow buttons TOGETHER.
	“CONFIGURE” will appear in the display.
3.	PRESS the	arrow button. “Setup” will appear in the
	display
4.	PRESS the	button. “Temperature Unit” will appear in
	the display.
5.	PRESS the	repeatedly until “Key Chirp” appears in the
	display.
6.	PRESS the	button. The currently set Key Chirp will
	flash.
7.	PRESS the	OR	arrow buttons to change the
	flashing “YES” or “NO”
8.	PRESS the	button to save the new setting.
9.	PRESS THE	2X to exit the program mode.

To change the Audible

Changing the Audible Sound will change the way the controller sounds when a timing cycle has completed its countdown.

1.With the controller display ON and either displaying the current menu item or displaying “OFF”, PRESS and

HOLD the button for approximately 3 seconds. Controller will display previously selected menu item and its corresponding item number OR “Standby / Menu Item”.

Page 19