LevelOne GSW-2690 user manual Set IP Address, Subnet Mask and Default Gateway IP Address

User Manual

•Set IP Address, Subnet Mask and Default Gateway IP Address

Please refer to Fig. 2-6 Console Management for details about the ex-factory setting. They are default setting of IP address. You can first either configure your PC IP address or change IP address of the switch, next to change the IP address of default gateway and subnet mask.

For example, your network address is 10.1.1.0, and subnet mask is 255.255.255.0. You can change the switch’s default IP address 192.168.1.1 to

10.1.1.1and set the subnet mask to be 255.255.255.0. Then, choose your default gateway, may be it is 10.1.1.254.

Default Value		GSW-2690		Your Network Setting
IP Address	192.168.1.1		10.1.1.1
Subnet	255.255.255.0		255.255.255.0
Default Gateway	192.168.1.254		10.1.1.254

Table 2-3

After completing these settings in the switch, it will reboot to have the configuration taken effect. After this step, you can operate the management through the network, no matter it is from a web browser or Network Management System (NMS).

Fig. 2-7 the Login Screen for CLI

Publication date: June, 2005

Revision A1

18