Guide to base unit settings

Useful Telephone Settings

To customise the base unit (general approach):

1{j/OK}

2Press {v} or {e} to select “SETTING BS”. i{>} L “INPUT CODE” is displayed.

3Enter the desired code number. Follow the instructions in the “Feature” column of the chart.

L To exit the operation, press {ih}.

Code No.	Feature (default setting)
{0}	Reset base unit to its default settings.*1
	− Enter base unit PIN (default: “0000”).*2 i{>}
{3}	Recall/flash time (600 ms)*3
	− Enter base unit PIN (default: “0000”).*2 i{2} i
	{1}
	− Select the desired setting by pressing {1} for 100 ms
	or {2} for 600 ms. i{>}
{5}	Change base unit PIN (“0000”).*4
	− Enter the current 4-digit base unit PIN.*2
	− Enter the new 4-digit base unit PIN.
	− Enter the new 4-digit base unit PIN again.

Code No.	Feature (default setting)
{6}	Call restriction*5
	■ Setting call restriction
	− Enter base unit PIN (default: “0000”).*2 iEnter
	the desired handset number by pressing the
	appropriate dial key.
	L The selected handset number flashes on the
	display.
	− {>}
	− Enter the phone number to be restricted (8 digits
	max.).
	L To select a different memory location, press {>}
	and enter a number.
	− {>}
	■ Turning on/off call restriction
	− Enter base unit PIN (default: “0000”).*2
	L Handset number is displayed. A flashing number
	indicates call restriction is on; a non-flashing
	number indicates call restriction is off.
	− Enter the desired handset number by pressing the
	appropriate dial key to turn on/off. i{>} 2 times

Emergency number (“111”, “911”, “999”)*6

−Enter base unit PIN (default: “0000”).*2 i{*}

■Storing:

−Enter the emergency number (8 digits max.). L To select a different memory location, press

{>} and enter a number.

−{>}

■Editing:

Press {>} to display the desired number. i{C} iEnter the new emergency number. i{>}