Useful Telephone Settings
14
Useful Telephone Settings
Guide to handset settings
To customise the handset (general approach):
1{j/OK}
2Press {v} or {e} to select “SETTING HS”. i {>}
3Press {v} or {e} to select the desired item in the handset settings
menu. i {>}
4Press {v} or {e} to select the desired item in the sub-menu. i {>}
5Press {v} or {e} to select the desired setting. i {>}
LThis step may vary depending on the feature being programmed.
LTo exit the operation, press {ih}.
Note:
LIn the following table, < > indicates the default settings. *1 If you select a melody for the external ringer tone, the ringer continues
to sound until the melody finishes even when another person answers
the call using another phone connected to the same line. If you want the
handsets to stop ringing at the same time, select ringer tone number 1.
*2 Auto talk feature allows you to answer calls simply by lifting the handset
off the base unit or charger. You do not need to press {C}. If you
subscribe to a Caller ID service and want to view the caller’s information
after lifting up the handset to answer a call, turn off this feature.

Alarm

An alarm sounds at the set time for 3 minutes.
Important:
LSet the date and time beforehand (page10 ).
1{j/OK}
2{v}/{e}: “SETTING HS” i {>}
3{v}/{e}: “TIME ALARM” i {>}
4{v}/{e}: “SET TIME” i {>}
Menu Sub-menu Page
TIME ALARM SET TIME 14
SET ALARM <OFF>—
RINGER OPT RINGER VOL <level 6>—
EXT RINGER*1 <RING TYPE 1>—
INT RINGER <RING TYPE 1>—
PAGING <RING TYPE 1>—
ALARM <RING TYPE 1>—
TONE OPT KEY TONE <ON>—
CALL WAITING <ON>—
RANGE ALARM <OFF>—
BATTERY LOW <ON>—
DISPLAY OPT STANDBY MODE <CLOCK>—
TALK MODE <TALK TIME>—
LANGUAGE <ENGLISH>10
CALL OPT CALL BAR <OFF>15
DIRECT NO 15
SET DIRECT <OFF>—
OTHER OPT HSPIN CHANGE <0000>15
AUTO TALK*2 <OFF>—
RESET HS —15
Menu Sub-menu Page
TG1311_1312_1313NZ(e).book Page 14 Tuesday, September 16, 2008 4:28 PM