![](/images/new-backgrounds/1189106/18910633x1.webp)
User Manual
•Takes the Delay Time into Account
Theoretically, the switch partitions the collision domain for each port in switch cascading that you may
The fiber, TP cables and devices’
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Fiber |
| ||||||
Round trip Delay: 4096 |
| Round trip Delay: 512 |
| |||||||||
|
|
|
|
|
|
|
| |||||
Cat. 5 TP Wire: | 11.12/m | Cat. 5 TP Wire: | 1.12/m |
| Fiber Cable: | 1.0/m |
| |||||
Fiber Cable | : | 10.10/m |
| TP to fiber Converter: 56 |
|
|
|
|
| |||
Bit Time unit | : 1ns (1sec./1000 Mega bit) | Bit Time unit: 0.01∝s (1sec./100 Mega bit) |
| |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
Table
Sum up all elements’
•Typical Network Topology in Deployment
A hierarchical network with minimum levels of switch may reduce the timing delay between server and client station. Basically, with this approach, it will minimize the number of switches in any one path; will lower the possibility of network loop and will improve network efficiency. If more than two switches are connected in the same network, select one switch as Level 1 switch and connect all other switches to it at Level 2. Server/Host is recommended to connect to the Level 1 switch. This is general if no VLAN or other special requirements are applied.
Publication date: June, 2005
Revision A1
13