User Manual
logout
Syntax:
logout
Description:
When you enter this command via Telnet connection, you would logout the system and disconnect. If you connect the system through direct serial port with
Argument:
None.
Possible value:
None.
Example:
None.
restore default
Syntax:
restore default
Description:
To restore the startup configuration as factory default configuration. If restoring default successfully, the CLI would prompt if reboot immediately or not. If you press Y or y, the system would reboot immediately; others would be back to the CLI system. After restoring default configuration, all the changes in the startup configuration would be lost. After rebooting, the entire startup configuration would reset to factory default.
Argument:
None.
Possible value:
None.
Example:
Restoring ...
Restore Default Configuration Successfully
Press any key to reboot system.
Publication date: June, 2005
Revision A1
146
