Intel D845HV, D845WN manual Setting the BIOS Configuration Jumper Block

Installing and Replacing Desktop Board Components

Setting the BIOS Configuration Jumper Block

CAUTION

Always turn off the power and unplug the power cord from the computer before changing the jumper. Moving the jumper with the power on may result in unreliable computer operation.

The location of the board’s BIOS configuration jumper is shown in Figure 17.

1

3

J9G1

OM11996

Figure 17. Location of the BIOS Configuration Jumper Block

The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup. Table 5 shows the jumper settings for the Setup program modes.

Table 5. Jumper Settings for the BIOS Setup Program Modes (J9G1)

Function / Mode

Normal

Configure

Recovery

Jumper Setting

1-2	1
	3
2-3	1
	3
None	1
	3

Configuration

The BIOS uses current configuration information and passwords for booting.

After the POST runs, the BIOS displays the maintenance menu. Use this menu to clear passwords.

The BIOS attempts to recover the BIOS configuration. A recovery diskette is required.

37