Using the Setup Program
Boot Configuration Submenu
Maintenance Main
| Advanced |
| Security | Power | Boot | Exit |
| ||
|
|
|
|
|
|
|
|
|
|
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Diskette Configuration
Event Log Configuration
Video Configuration
The submenu shown in Table 13 is used to set the Plug & Play options, reset configuration data, and the
Table 13. Boot Configuration Submenu
Feature
Plug & Play O/S
Reset Config Data
Numlock
Options
•No (default)
•Yes
•No (default)
•Yes
•Off
•On (default)
Description
Specifies if manual configuration is desired.
No lets the BIOS configure all devices. This setting is appropriate when using a Plug and Play operating system. Yes lets the operating system configure Plug and Play devices not required to boot the system. This option is available for use during lab testing.
No does not clear the PCI/PnP configuration data stored in flash memory on the next boot.
Yes clears the PCI/PnP configuration data stored in flash memory on the next boot.
Specifies the
53