Bertazzoni CB36600X Cooker Hood Installation, Electrical Connection, Electrical Shock Hazard

Models: CB36600X CB36500X

1 12
Download 12 pages 20.92 Kb
Page 5
Image 5
COOKER HOOD INSTALLATION

COOKER HOOD INSTALLATION

The bottom of the hood should be 25 ½ " (65 cm) min. to 31 ½ " (80 cm) above the countertop. Refer to the rangehood installation instructions for additional information. These dimensions provide for safe and efficient operation of the hood.

ELECTRICAL CONNECTION

This unit is manufactured for a polarized, grounded 120 volt/60 Hz, 16 amp system. Electric power consumption is about 1 W. The minimum of 102 VAC is required for proper operation of gas ignition systems. This circuit must be grounded and properly polarized. The unit is equipped witth a SJT power cord, and in case of replacement, the cable shall be replaced with one of the same type, size and length.

WARNING

Electrical Grounding Instructions

This appliance is equipped with a three prong plug for your protection against shock hazard and should be plugged directly into a properly grounded socket. Do not cut or remove the grounding prong from this plug.

WARNING

ELECTRICAL SHOCK HAZARD

Disconnect electrical power at the circuit breaker box or fuse before installing the appliance

Electrically ground appliance

Use copper conductors only. Failure to follow these instructions could result in seriuos injury or death

5

Page 5
Image 5
Bertazzoni CB36600X, CB36500X dimensions Cooker Hood Installation, Electrical Connection, Electrical Shock Hazard