Bertazzoni dimensions Models CB36600X, Models CB36500X, C3Y0..U7X2 or 5A, C3W0..U7X2 or 5A

Models CB36600X			[C3Y0..U7X(2 or 5)A]
Adapting to different types of gas
Burner	Position	Injector		Gas	Pressure	Max Rate		Min Rate		By-pass
		diam. [mm.]		Type	[i.w.c.]	[BTU/h]	[W]	[BTU/h]	[W]	diam. [mm]
Auxiliary	Front R	0,92		NG	4”	3750	1098	900	264	Regulated
		0,56		LP (Propane)	11”	3750	1098	900	264	0,29
Semi-Rapid	Rear L & C	1,17		NG	4”	6000	1759	1500	439	Regulated
	Front C	0,73		LP (Propane)	11”	6300	1845	1500	439	0,36
Rapid	Rear R	1,55		NG	4”	10400	2046	2500	732	Regulated
		0,98		LP (Propane)	11”	11400	3339	2500	732	0,47
Dual Burner	Front L Inner	0,80		NG	4”	2730	799	900	264	Regulated
		0,50		LP (Propane)	11”	2900	8479	900	264	0,29
	Front L Outer	N°2 x 1,30		NG	4”	15000	4394	4500	1319	Regulated
		N°2 x 0,83		LP (Propane)	11”	16400	4804	4500	1319	0,65

Models CB36500X			[C3W0..U7X(2 or 5)A]
Adapting to different types of gas
Burner	Position	Injector		Gas	Pressure	Max Rate		Min Rate		By-pass
		diam. [mm.]		Type	[i.w.c.]	[BTU/h]	[W]	[BTU/h]	[W]	Diam. [mm]
Auxiliary	Front R	0,92		NG	4”	3750	1098	900	264	Regulated
		0,56		LP (Propane)	11”	3750	1098	900	264	0,29
Semi-Rapid	Rear L and R	1,17		NG	4”	6000	1759	1500	439	Regulated
		0,73		LP (Propane)	11”	6300	1845	1500	439	0,36
Rapid	Front L	1,55		NG	4”	10400	2046	2500	732	Regulated
		0,98		LP (Propane)	11”	11400	3339	2500	732	0,47
Dual Burner	Centre Inner	0,80		NG	4”	2730	799	900	264	Regulated
		0,50		LP (Propane)	11”	2900	8479	900	264	0,29
	Centre Outer	N°2 x 1,30		NG	4”	15000	4394	4500	1319	Regulated
		N°2 x 0,83		LP (Propane)	11”	16400	4804	4500	1319	0,65

CAUTION: save the orifices removed from the appliance for future use

Regulation of burners

Work surface burner adjustment: follow the instructions below to adjust the work surface burner minimum:

1)Light the burner and set the knob to the MINIMUM position (small flame).

2)Remove the knob of the valve that is press fit on the rod of that valve.

3)The cooker is equipped with safety valves, use a small slotted screwdriver the choke valve located on the valve body and turn the choke screw to the right or left until the burner flame is adjusted to minimum

4)Make sure that the flame does not go out when switching quickly from the MAXIMUM to the MINIMUM position.

WARNING: The above-mentioned adjustment should be made only for natural gas, while for operation with liquid gas the screw must be locked at the end in a clockwise direction. The grill burner always operates at maximum and therefore no minimum adjustment is required.

9