Enterasys Networks Wireless Ethernet Adapter I Table B-2 Event Log Error Table, Error Code, tion

Table B-2: Event Log Error Table

All entries in the event log are preceded by a number. This number is a timestamp used by Technical Support, but is not relevant to looking up items in this table.

Error Code	Problem	Steps to take
Configuration Errors
xxxx: [yyyy]: section does	Section named yyyy	•	Save your current
not exist	in configuration file		configuration (if applicable).
		•	Reset the Ethernet Adapter
	named xxxx was
	missing.		units configuration to Factory
			Defaults.
		• Reset the Ethernet Adapter.
		•	Restore configuration (if
			applicable).
xxxx: [yyyy]: “zzzz”: entry	Entry zzzz refers to a	•	Save your current
refers to non-existent sec-	section that is not		configuration (if applicable).
		•	Reset the Ethernet Adapter
tion	located in file xxxx.
			units configuration to the
			factory defaults.
		• Reset the Ethernet Adapter.
		•	Restore configuration (if
			applicable).
xxxx: [yyyy]: “zzzz”: entry	Entry zzzz in sec-	•	Save your current
does not exist	tion yyyy of file		configuration (if applicable).
		•	Reset the Ethernet Adapter
	xxxx was missing.
			units configuration to the
			factory defaults.
		• Reset the Ethernet Adapter.
		•	Restore configuration (if
			applicable).

B-4