PC Card Configuration

3)Enter the Network Name. The Network Name must match the Access Point, or match the name to which you will use to establish a Ad-Hoc network. The Network Name is case sensitive. The Network Name is used to specify a unique IEEE 802.11 wireless network. Wireless Ethernet Adapters units use the Network Name to associate to a specific Access Point (AP). Only devices with the same network name will associate with each other. Alphanumeric values may be used in this field.

4)Enter the Station Name. The Station Name is an identifier for each Ethernet Adapter. The value supplied in this field is for convenience in identifying the Ethernet Adapter units with software, such as the Ethernet Adapter Manager.

5)Select the Network Operation.

a)Select Access Point if your configuration includes Access Points. Select Ad-hoc if your configuration does not include Access Points.

b)Click on the Update and Reset Unit button. The Ethernet Adapter Manager Message Log appears with a message stating that the update was successful.

Ethernet Adapter Manager Installation 4-13

Page 39
Image 39
Enterasys Networks Wireless Ethernet Adapter I manual PC Card Configuration