Installation Procedure

5)Gently insert PC card (face up) into the designated slot as shown in Figure 3-3.

Figure 3-3: Inserting the PC Card

WIRELESS LANS

ENJOY THE FREEDOM OF WIRELESS NETWORKING

6)Replace the cap on the Ethernet Adapter that you removed in step 3 by snapping the cap straight down on the body.

7)If you are mounting the Ethernet Adapter, install the bottom mounting plate where desired as shown in Figure 3-4. Then, place the Ethernet Adapter onto the mounting plate and snap it into place. Ensure that the Ethernet Adapter is secure.

Figure 3-4: Installing the Mounting Plate (Optional)

8)Connect a standard, straight-through 10BaseT Ethernet cable between the RJ-45 port on the Ethernet Adapter and the network port on the computer where you will install the Ethernet Adapter Manager configuration software.

Installation 3-3

Page 25
Image 25
Enterasys Networks Wireless Ethernet Adapter I manual Inserting the PC Card