JVC GET0199-001A, GET0200-002A Tuning in to a preset DAB service, Tune in to an ensemble you want

ENGLISH 3 Tune in to an ensemble you want.

4 Select a service of the ensemble you want to listen to.

To select the next service

To select the previous service

5 Press and hold the number button (in this example, 1) for more than 2 seconds to store the selected service into the preset number you want.

Selected preset number

6 Repeat the above procedure to store other DAB services into other preset numbers.

Notes:

•You can only preset primary DAB services. If you store a secondary service, its primary service will be stored instead.

•A previously preset DAB service is erased when a new DAB service is stored in the same preset number.

•Preset DAB services are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the DAB services again.

Tuning in to a preset DAB service

You can easily tune in to a preset DAB service. Remember that you must store services first. If you have not stored them yet, see “Storing DAB services in memory” on pages 49 and 50.

Before you start....

Press FM/AM DAB briefly if CD, CD changer, or external component is the current source.

1 Select the DAB tuner.

Each time you press and hold the button, the DAB tuner and the FM/AM tuner are alternately selected.

DAB FM/AM

2 Select the DAB band (DAB1, DAB2, or DAB3) you want.

Each time you press the button, the DAB band changes as follows:

DAB 1	DAB 2	DAB 3
(d1)	(d2)	(d3)

3 Select the number (1 – 6) for the preset DAB service (primary) you want.

Note:

If the selected primary service has some secondary services, pressing the same number button repeatedly will tune in to the secondary services.

50