JVC GET0199-005A, GET0200-002A, GET0199-001A, GET0200-001A manual Storing stations in memory

2 Press and hold ¢or 4 until “M” (manual) starts flashing on the display.

3 Tune in to a station you want while “M” (manual) is still flashing.

To tune in to stations of higher frequencies

When an FM stereo broadcast is hard to receive:

1 Press MODE to enter the functions mode while listening to an FM stereo broadcast.

2 Press MO (monaural), while “MODE” is still on the display, so that “MONO” appears on the display.

Each time you press the button, the monaural mode turns on and off alternately.

ENGLISH

To tune in to stations of lower frequencies

•If you release your finger from the button, the manual mode will automatically turns off after 5 seconds.

•If you hold down the button, the frequency keeps changing—in 50 kHz intervals (87.5 MHz – 108.0 MHz for FM 1 and FM 2), in 30 kHz intervals (65.00 MHz – 74.00 MHz for FM 3) and 9 kHz for AM —MW/LW until you release the button.

MO (monaural) indicator

When the MO indicator is lit on the display, the sound you hear becomes monaural but the reception will be improved.

Storing stations in memory

You can use one of the following two methods to store broadcasting stations in memory.

•Automatic preset of FM stations: SSM (Strong- station Sequential Memory)

•Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM band (FM1, FM2, and FM3).

1 Select the FM band (FM1 – 3) you want to store FM stations into.

Each time you press the button, the band changes as follows:

FM 1	FM 2	FM 3	A M
(F1)	(F2)	(F3)	(A1)

CONTINUED ON THE NEXT PAGE

11