JVC GET0199-005A, GET0200-002A Storing your own sound adjustments, MID Level, LOW Level, HI Level

Storing your own sound adjustments

You can adjust the sound modes to your preference and store your own adjustments in memory (USER 1, USER 2 and USER 3).

•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.

1 Press MODE to enter the functions mode.

2 Press EQ (equalizer) while “MODE” is still on the display.

The last selected sound mode

is called up.

3 Select the sound mode you want to adjust.

Ex.: When you select “JAZZ”

4 Select sound elements to adjust.

Each time you press the

button, the sound elements

change as follows:

LOW LEVEL* = LOW FREQ = LOW WIDTH

=MID LEVEL* = MID WIDTH

=HI (high) LEVEL* = HI (high) FREQ

=(back to the beginning)

LEVEL (LOW, MID, HI):
		MID LEVEL	ENGLISH
LOW LEVEL
Adjust the enhancement level.
* By pressing	¢ or 4 , you can
directly move as follows:

HI LEVEL

FREQ (LOW, HI):

Select the center frequency to adjust.

WIDTH (LOW, MID):

Select the band width level.

5 Adjust the selected sound element.

Indication		Preset values
	LOW		MID		HI
LEVEL	–06 (min.)	–06 (min.)		–06 (min.)
	+06 (max.)	+06 (max.)		+06 (max.)
FREQ.	60Hz			8kHz
	80Hz			10kHz
	100Hz			12kHz
	120Hz			15kHz
WIDTH	1 (min.)	1 (min.)
	4 (max.)	2 (max.)

6 Repeat steps 4 and 5 to adjust the other sound elements.

7 Select one of the user sound modes (USER 1, USER 2, USER 3).

8 Press EQ to store the adjustments.

“MEMORY” appears for a while.

33