JVC GET0200-002A, GET0199-005A manual Each time you press Button, the band changes as follows

RADIO OPERATIONS

ENGLISH

Listening to the radio

You can use either automatic searching or manual

searching to tune in to a particular station.

Searching for a station automatically: Auto search

1 Select the band (FM1 – 3, AM).

Each time you press the

button, the band changes as follows:

FM 1 FM 2 FM 3 A M

(F1) (F2) (F3) (A1)

Selected band appears*.

Lights up when receiving an FM stereo broadcast with sufficient signal strength.

*When “CLOCK DISP” is set to “CLK DISP ON” (see page 36), the current indication will soon change to the clock time.

Note:

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

2 Start searching for a station.

To search for stations of higher frequencies

To search for stations of lower frequencies

When a station is received, searching stops.

To stop searching before a station is

received, press the same button you have

pressed for searching.

Note:

FM1 and FM2: 87.5 MHz – 108.0 MHz FM3: 65.00 MHz – 74.00 MHz

Searching for a station manually: Manual search

1 Select the band (FM1 – 3, AM).

Each time you press the button, the band changes as follows:

FM 1	FM 2	FM 3	A M
(F1)	(F2)	(F3)	(A1)

Note:

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

10