JVC GET0200-001A, GET0200-002A manual What you can do more with, To use Alternative Reception

Models: GET0199-001A GET0200-002A GET0200-001A GET0199-005A

1 124
Download 124 pages 46.86 Kb
Page 51
Image 51

What you can do more with

DAB

Tracing the same programme automatically (Alternative Reception)

You can keep listening to the same programme.

While receiving a DAB service:

When driving in an area where a service cannot be received, this unit automatically tunes in to another ensemble or FM RDS station, broadcasting the same programme.

While receiving an FM RDS station:

When driving in an area where a DAB service is broadcasting the same programme as the FM RDS station is broadcasting, this unit automatically tunes in to the DAB service.

To use Alternative Reception

When shipped from the factory, Alternative Reception is activated.

See also “Changing the general settings (PSM)” on pages 34 and 35.

1Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2Press ¢ or 4 to select “DAB AF” (alternative frequency).

3Turn the control dial to select the desired mode.

AF ON: Traces the programme among DAB services and FM RDS stations—Alternative Reception. The AF indicator lights up on the display (see page 14).

AF OFF: Alternative Reception is deactivated.

4Press SEL (select) to finish the setting.

Note:

When Alternative Reception (for DAB services) is activated, Network-Tracking Reception (for RDS stations: see page 14) is also activated automatically. On the other hand, Network-Tracking Reception cannot be deactivated without deactivating Alternative Reception.

To adjust the DAB volume level

You can adjust the volume level of DAB tuner and store it in memory. By adjusting the volume level properly to match it to the FM sound level, you will not need to adjust the volume level each time you change the source to DAB.

When shipped from the factory, DAB volume level is set at “VOL 00.”

See also “Changing the general settings (PSM)” on pages 34 and 35.

1Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2Press ¢ or 4 to select “DAB VOL” (volume).

3Turn the control dial to set to the desired volume.

You can set it from “VOL –12” to “VOL +12.”

4Press SEL (select) to finish the setting.

ENGLISH

51

Page 51
Image 51
JVC GET0200-001A, GET0200-002A What you can do more with, To use Alternative Reception, To adjust the DAB volume level