Table B-1: Problem Diagnosis
Situation | Problem | Steps to take |
|
|
|
The power light is off | The Ethernet Adapter is | Verify that all physical connec- |
or the power light is | not receiving power | tions are securely in place. |
blinking. | properly. | Contact Technical Support if the |
|
| |
|
| problem persists. |
|
|
|
The power light is on | Configuration or | Check the System Event Log to |
steady and the status | software alert condition | determine the cause, and refer to |
light is on. |
| the following Event Log Error |
|
| Table. |
Radio Association light is not turning on and the Status light is off.
The radio is not linking to the Access Point.
•Verify that the radio is supported by the Ethernet Adapter.
•Verify that the Network Name is set to match the Access Point.
•Verify that the radio is fully in the socket.
