Enterasys Networks Wireless Ethernet Adapter I manual Chapter Installation, Installation Procedure

Chapter 3

Installation

This section describes how to install the RoamAbout Wireless Ethernet Adapter. It also includes the installation of the PC (PCMCIA) wireless LAN card into the Ethernet Adapter.

NOTE

The Ethernet Adapter does NOT include a RoamAbout 802.11 DS PC card. These cards are sold separately. Contact your Enterasys Representative for more information.

Installation Procedure

To install the Ethernet Adapter, perform the following steps:

1)Remove your RoamAbout Ethernet Adapter from the packaging. The Ethernet Adapter ships fully assembled. To install the PC Card and use the Ethernet Adapter, some disassembly and re-assembly is required.

2)Remove the cap from the Ethernet Adapter by pressing on the side of the cap to release it as shown in Figure 3-1. Removal of the cap reveals the PC card slot.

Figure 3-1: Removing the Cap

Press Here to Lift Cover

Installation 3-1