Error Code | Problem | Steps to take | |
|
|
|
|
Hardware Errors |
|
|
|
FLASH failure. Unable to | FLASH may be | Contact Technical Support. | |
read or write configuration. | damaged. |
|
|
| Configuration can- |
|
|
| not be accessed or |
|
|
| saved. |
|
|
|
|
| |
Initialization of interface | Radio could not be | Try each of these steps in order. If | |
“lan0” failed. | initialized. | any of these steps succeed, you | |
|
| do not have to perform the rest of | |
|
| the steps. | |
|
| 1) | Reset the Ethernet Adapter. |
|
| 2) | Unplug the power, wait for |
|
|
| approximately 30 seconds and |
|
|
| then reapply power. |
|
| 3) | Reset the Ethernet Adapter to |
|
|
| the factory default |
|
|
| configuration and reset the |
|
|
| Ethernet Adapter. |
|
| 4) | Contact Technical Support if |
|
|
| the problem persists. |
|
|
|
|
xxxx: file does not exist. | Configuration file | • | Reset the configuration to |
| could not be found. |
| Factory Defaults, and reset the |
|
| Ethernet Adapter. | |
|
|
| |
|
| • | If the problem persists, |
|
|
| contact Technical Support. |
|
|
|
|
