SMC Networks SMC6750L2 manual 138, Syntax Channel-group channel-idno channel-group

COMMAND LINE INTERFACE

Command	Function	Mode	Page
Trunk Status Display Command
show interfaces status	Shows trunk information	NE,	3-75
port-channel		PE

channel-group

Use this command to add a port to a trunk. Use the no form to remove a port from a trunk.

Syntax

channel-group channel-idno channel-group

channel-id- Trunk index (Range: 1-6)

Default Setting

A new trunk contains no ports.

Command Mode

Interface Configuration (Ethernet)

Command Usage

•The maximum number of ports that can be combined as a static trunk is four 10/100 Mbps ports, and two 1000 Mbps ports.

•All links in a trunk must operate at the same data rate and duplex mode.

Example

The following example creates trunk 1 and then adds port 11:

Console(config)#interface port-channel 1

Console(config-if)#exit

Console(config)#interface ethernet 1/11

Console(config-if)#channel-group 1

Console(config-if)#

3-138