CONFIGURING THE SWITCH
(port or trunk) on your switch, you can manually configure that interface to join all the current multicast groups. This can ensure that multicast traffic is passed to all the appropriate interfaces within the switch.
Command Attributes
•Interface – Activates the Port or Trunk scroll down list.
•VLAN ID – Selects the VLAN to propagate all multicast traffic coming from the attached multicast router/switch.
•Port or Trunk – Specifies the interface attached to a multicast router.
Web – Click IGMP/Static Multicast Router Port Configuration. Specify the interfaces attached to a multicast router, indicate the VLAN which will forward all the corresponding multicast traffic, and then click “Add.” After you have completed adding interfaces to the list, click “Apply.”
CLI – This example configures port 11 as a multicast router port within VLAN 1.
Console(config)#ip igmp snooping vlan 1 mrouter ethernet 1/11
Console#show ip igmp snooping mrouter vlan 13-119VLAN M'cast Router Port Type
----
1Eth 1/11 Static
