COMMAND LINE INTERFACE

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

To force operation to the speed and duplex mode specified in a speed-duplex command, use the no negotiation command to disable auto-negotiation on the selected interface.

Example

The following example configures port 5 to 100 Mbps, half-duplex operation.

Console(config)#interface ethernet 1/5

Console(config-if)#speed-duplex 100half

Console(config-if)#no negotiation

Console(config-if)#

Related Commands

negotiation

negotiation

Use this command to enable autonegotiation for a given interface. Use the no form to disable autonegotiation.

Syntax

negotiation no negotiation

Default Setting

Enabled

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

If autonegotiation is disabled, auto-MDI/MDI-X pin signal configuration will also be disabled for the RJ-45 ports.

3-70

Page 182
Image 182
SMC Networks SMC6750L2 manual Syntax Negotiation no negotiation Default Setting