PRIORITY COMMANDS

Command Usage

WRR allows bandwidth sharing at the egress port by defining scheduling weights.

Example

The following example shows how to assign WRR weights of 1, 3, 5 and 7 to the CoS priority queues 0, 1, 2 and 3:

Console(config)#queue bandwidth 1 3 5 7

Console(config)#

Related Commands

show queue bandwith

queue cos-map

Use this command to assign class of service (CoS) values to the CoS priority queues. Use the no form set the CoS map to the default values.

Syntax

queue cos-mapqueue_id [cos1 ... cosn] no queue cos-map

queue_id - The queue id of the CoS priority queue.

- Ranges are 0 to 3, where 3 is the highest CoS priority queue.

cos1 .. cosn - The CoS values that are mapped to the queue id. It is a space-separated list of numbers. The CoS value is a number from 0 to 7, where 7 is the highest priority.

3-123

Page 235
Image 235
SMC Networks SMC6750L2 manual Queue cos-map, 123