INTERFACE COMMANDS

Example

The following example configures port 11 to use autonegotiation.

Console(config)#interface ethernet 1/11

Console(config-if)#negotiation

Console(config-if)#

capabilities

Use this command to advertise the port capabilities of a given interface during autonegotiation. Use the no form with parameters to remove an advertised capability, or the no form without parameters to restore the default values.

Syntax

capabilities {1000full 100full 100half 10full 10half flowcontrol symmetric}

no port-capabilities [1000full 100full 100half 10full 10half flowcontrol symmetric]

1000full - Supports 1000 Mbps full-duplex operation

100full - Supports 100 Mbps full-duplex operation

100half - Supports 100 Mbps half-duplex operation

10full - Supports 10 Mbps full-duplex operation

10half - Supports 10 Mbps half-duplex operation

flowcontrol - Supports flow control

symmetric - Transmits and receives pause frames for flow control (Gigabit ports only)

Default Setting

The default values for Fast Ethernet include 10half, 10full, 100half, 100full and flow control. The default values for Gigabit Ethernet include all settings.

Command Mode

Interface Configuration (Ethernet, Port Channel)

3-71

Page 183
Image 183
SMC Networks SMC6750L2 manual Capabilities, Default Setting