SMC Networks SMC6750L2 manual FLASH/FILE Commands

FLASH/FILE COMMANDS

Syntax

copy file {file running-config startup-config tftp} copy running-config {file startup-config tftp} copy startup-config {file running-config tftp} copy tftp {file running-config startup-config}

•file - Keyword that allows you to copy to/from a file.

•running-config- Keyword that allows you to copy to/from the current running configuration.

•startup-config- The configuration used for system initialization.

•tftp - Keyword that allows you to copy to/from a TFTP server.

Default Setting

None

Command Mode

Privileged Exec

Command Usage

•The system prompts for data required to complete the copy command.

•The destination file name should not contain slashes (\ or /), the leading letter of the file name should not be a period (.), and the length of file name should be 1 to 31characters. (Valid characters: A-Z, a-z, 0-9, “.”, “-”, “_”)

•The number of user-defined configuration files is limited only by available Flash memory space.

•You can use “Factory_Default_Config.cfg” as the source to copy from the factory default configuration file, but you cannot use “Factory_Default_Config.cfg” as the destination.

•To replace the startup configuration, you must use startup-config as the destination.

•The Boot ROM image cannot be uploaded or downloaded from the TFTP server. You must use a direct console connection and access the download menu during a boot up to download the Boot ROM (or diagnostic) image. See “Upgrading Firmware via the Serial Port” on page A-2for more details.

3-19