ADDRESS TABLE COMMANDS
bridge address
Use this command to map a static address to a port in a VLAN. Use the no form to remove an address.
Syntax
bridge
no bridge
•
•
•
•interface
•ethernet unit/port
-unit - This is device 1.
-port - Port number.
•
•action -
•
•permanent - Assignment is permanent.
Default Setting
No static addresses are defined. The default mode is permanent.
Command Mode
Global Configuration
Command Usage
The static address for a host device can be assigned to a specific port within a specific VLAN. Use this command to add static addresses to the MAC Address Table. Static addresses have the following characteristics:
•Static addresses will not be removed from the address table when a given interface link is down.
