Toshiba SL-9000-FFH-CA, SL-9000N-FFH-CA, SL-9000N-FFH-US Error Message Table, Programming Mode

15. ERROR MESSAGE TABLE

15. ERROR MESSAGE TABLE

15. ERROR MESSAGE TABLE

Take the following action if an error message has appeared on the commodity name display along with the buzzer sounding.

WARNING:

If you cannot solve the problem with the following solution instruction, do not attempt further trouble shooting, by yourself. Turn the power off, unplug the printer, then contact your Authorized Service representative for assistance.

Do not attempt to repair or adjust alone, because electrical equipment is dangerous.

● Programming Mode

Message	Cause					Solution
DATA ENTRY ERROR	Error in key input.	Press the		CLEAR			key, and re-input the
		right data.
MEMORY FULL	No memory space to set PLU.	Press the		CLEAR			key, and delete
		unnecessary PLUs.
DUPLICATE PLU	The PLU # being changed is	Press the		CLEAR			key, and check the
	already registered.	PLU.
PLU NOT FOUND	The PLU # being called out is	Press the		CLEAR			key, and set the data to
	not registered.	free PLU#.
CHARACTER OVERRUN	Attempt is made to set more	Press the		CLEAR			key, and re-input the
	than max. allowed number of	right data.
	characters.
PRT FAILURE DETECTED	Printer trouble.	1. Check that the label and print head are
		set correctly.
		2. If the label home position is misaligned,
		press the			FEED			key.
LABEL OVERRUN	Label overruns.	Press the		FEED		key.
RESTORE THE PLUS	The capacity of RAM was	Press the	CLEAR				key and save the
	changed with the ingredient	ingredient data. Then delete the data from
	data stored.	the memory of the unit. After that change
		the capacity of RAM and load the data to
		the unit.

15- 1